- Adds up to 1.52m of valuable lighting to perimeter of vehicle, increasing visibility in areas dome or backup lighting won’t reach (see drawing below)
- Low profile light protrudes only 6.35cm from vehicle surface, while projecting light far beyond light surface
- Rear fins keep heat away from LEDs and light circuity, allowing for increased light output and light longevity
- Minimal electrical draw (1.2A) allows for the use of multiple lights, without demanding significant power from vehicle
- Hard-wired .180 bullet terminals prevent concerns for pin corrosion at light, and install without the need for adapters or additional wiring connections •
- Ideal for use with lift gate trailers and body vehicles
- Care should be taken to install this device so that it cannot operate while the trailer or vehicle is in motion. Contact the Trailer/Vehicle OEM or Truck-Lite Technical Service for assistance
Material:
- Polycarbonate lens
- Die-Cast auminium housing
- Hard-wired 18 gauge wire w/.180 bullet terminals
- Encapsulated circuitry
Light Source:
- 4 light emitting diodes
- Designed at 13.5V, 1.2A
Part No. – 81335C
Description – LED perimeter light, 12v
Ctn. Qty. 1